Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never submerge the machine
in water!
CLEANING THE DUST RESERVOIR AND FILTERS
1.
Press the dust container release knob to release the dust container from the appliance.
2.
Then remove the filter holder from the dust container (E) and empty the dust container.
3.
Detach the HEPA filter (A) from the filter holder (C). There is a removable coarse filter (B) under the
HEPA filter. You can also detach the bottom part (D) of the filter holder for more precise cleaning.
4.
Remove the motor filter (F) from the motor section.
5.
Clean all the parts (A, B, C, D, E and F) under running water. Allow all the parts to dry completely
before reassembling and making use of the device again.
1
We advise replacing the filters regularly to ensure an optimal operation of the machine. Dirty filters
will reduce the suction power drastically. After every cleaning, clean the dust reservoir and the filters to
extend the life span of your machine.
CLEANING THE FLOOR BRUSH
1.
Remove the floor nozzle from the upright vacuum cleaner. Press the
the floor nozzle and remove it from the machine.
2.
Slide the cover on the right side of the floor brush to the right.
3.
Remove the
rotating floor brush from the floor nozzle.
4.
Remove hairs and other dirt that have wrapped around the floor brush. If you do not clean the floor
brush regularly, it will become damaged and your machine will become unusable.
5.
The rotating floor brush may be rinsed off under running water. Make sure that it is completely
before using it.
6.
Place the floor brush back into the floor nozzle when it is clean.
7.
Slide the cover closed again to secure the floor brush.
8.
Push the nozzle back onto the stick. The machine is now again ready for use.
1
www.domo-elektro.be
2
2
A
3
4
B
C
D
E
release button at the back of
7
F
dry
37
DO1032SV
Publicidad
