Publicidad
Idiomas disponibles
Idiomas disponibles
UK
NL
DE
FR
Technical Data:
Type LED: 3 W COB LED
Brightness: 100 ~ 300 Lumen
Battery: 3.7 V 0.6 Ah Li-Ion
IP rating: IP52
IK rating: IK07
Charging time: 2 hours
Run time: 1.5 hours to 3 hours
Working temperature: -20 ~ 50°C
Product dimensions: 89x21x12 mm
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the
plug fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• COB LED technology
• Magnetic base (12N)
• Lamp use is not affected by cold temperatures
• 3.7 V 0.6 Ah Li-Polymer battery provides 1.5 - 3 hours light output
• IP52 rated
• IK07 rated
• Shock resistant Alum housing
• Ultra slim design
• Lightweight
• Easy to operate
Instructions for use:
• Charge the battery for at least 2 hours before first use
• To charge the lamp, connect the cable via the USB-C to the lamp directly. Then connect the USB plug to either the 100 ~ 240 V
adapter (optional) or any other USB power source available
• The lamp is controlled by 1 button. Push the ON/OFF button (1x) to turn on the spot (300 Lumen), 2x for main light (100 Lumen)
and 3x to turn the lamp OFF
• Do not leave the battery in a fully discharged condition. Recharge the lamp at least once every half year. Always fully charge the
battery to extend the battery lifetime. Always use the original charger
Accessories and spare parts:
30 cm USB-C cable
100 ~ 240 V charger optional (SIN-100.1001-A)
Use only accessories and spare parts approved by the manufacturer.
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open flames
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, it must be immediately replaced with one of the same type
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear
damaged as this may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
2
ES
Lumen Laser class I
Protection class III
EAN: 8717775519386
Colour temperature: 6000 K
RA: >68
Weight: 35 g
Technical data optional charger (SIN-100.1001A):
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 1 A
Publicidad
