Troubleshooting
1
Water will not shut off when
turning the handle to the OFF
position
□
When you turn the handle to the full on position,
the water will turn on.
□
But when you turn the handle to the full off
position, the water does not turn off.
□
This indicates that the cartridge is damaged.
Turn off the water supply, remove the handle
and replace the cartridge (1).
1
14
2
The light on the sensor is
flashing continuously
□
If the handle is closed, turn the handle to the
on position and move your hand in the sensor
area. If the sensor ashes continuously and
slowly, then replace the 4 "AA" batteries.
-
Flash continuously
and slowly
J
Replace the batteries