Descargar Imprimir esta página

Craftsman 917.388861 Manual Del Propietário página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

MOWING
TIPS
,_, CAUTION:
Do not use de-thatcher
blade attachments
on your mower. Such
attachments
are hazardous,
will damage
your mower and could void your warranty,
• Under certain
conditions,
such as very
tall grass, it may be necessary
to raise
the height of cut to reduce pushing
effort and to keep from overloading
the
engine and leaving
clumps
of grass clip-
pings. It may also be necessary
to re-
duce ground speed
and/or
run the lawn
mower over the area a second
time,
• For extremely
heavy cutting,
reduce the
width of cut by overlapping
previously
cut path and mow slowly.
• For better grass bagging
and most cut-
ting conditions,
the engine speed should
be set in the FAST position.
• When using a rear discharge
lawn
mower in moist, heavy grass, clumps
of cut grass may not enter the grass
catcher.
Reduce
ground speed
(pushing
speed)
and/or
run the lawn mower over
the area a second
timer
• If a trail of clippings
is left on the right
side of a rear discharge
mower, mow in
a clockwise
direction
with a small over-
lap to collect the clippings
on the next
pass.
• Pores in cloth grass catchers
can be-
come filled with dirt and dust with use
and catchers
will collect
less grass. To
prevent
this, regularly
hose catcher
off
with water and let dry before using.
• Keep top of engine around starter
clear
and clean of grass clippings
and chaff.
This will help engine air flow and extend
engine
life,
MULCHING
MOWING
TIPS
IMPORTANT:
For best performance,
keep mower housing free of built-up
grass and trash. See "CLEANING" in the
Maintenance section of this manual°
° The special mulching blade will recut
the grass clippings many times and
reduce them in size so that as they fall
onto the lawn they will disperse into
the grass and not be noticed. Also, the
mulched grass wilt biodegrade quickly
to provide nutrients for the lawm Always
mulch with your highest engine (blade)
speed as this will provide the best recut-
ting action of the blades.
• Avoid cutting your lawn when it is wet.
Wet grass tends to form clumps and
interferes with the mulching action. The
best time to mow your lawn is the early
afternoon.
At this time the grass has
dried, yet the newly cut area will not be
exposed to direct sunlight.
° For best results, adjust the lawn mower
cutting height so that the lawn mower
cuts off only the top one-third of the
grass blades. If the lawn is overgrown it
will be necessary to raise the height of
cut to reduce pushing effort and to keep
from overloading the engine and leaving
clumps of mulched grass. For extremely
heavy grass, reduce your width of cut
by overlapping previously cut path and
mow slowly,
MAXl_
° Certain types of grass and grass
conditions may require that an area be
mulched a second time to completely
hide the clippings. When doing a sec-
ond cut, mow across (perpendicular) to
the first cut path,
° Change your cutting pattern from week
to week° Mow north to south one week
then change to east to west the next
week. This will help prevent matting and
graining of the lawn.
10

Publicidad

loading