Publicidad
Idiomas disponibles
Idiomas disponibles
—-——
—w—
Specifications
Tuner section
Frequency range, antenna — FM: 87.5 -108.0 MHz Rod antenna,
AM: 530-1,710
kHz Ferrite bar antenna
Deck section
Track format — 4 tracks, 2 channels/ Frequency range — Normal tape"
50-12,500
Hz (EIAJ) / Recording system — AC bias/ Erasing system
— Magnet erase/ Heads — Recording/playback head (1), Erasure
head (1)
CD
player section
DISC— Compact disc/ Scanmng method — Non-contact optical
scanner (semiconductor laser)
General
Speaker — 100 mm cone type (2), 27 mm ceramic type (2) / Output —
Headphones jack (stereo mini-jack) / Power output — 2.5 W + 2.5 W
(EIAJ 7,00hms
DC) / Power requirements — DC 12 V using eight size
C (R14) batteries, AC 120 V, 60 Hz/ Power consumption — 12 W /
Dimensions—
460 (W) x 184 (H) x 261 (D) mm (181/E x 71/4 x 103/6
in.) / Weight — 4.1 kg (9 Ibs 1 oz ) (excluding batteries) / Accessory
—AC cord (1)
o Specifications and external appearance are subject to change
without notice,
Speclf!catlons, trade mark and model name are marked on the
bottom of the umt.
r~
Please check the copyright laws relating to recordings from disc
radio or external tape for the country In wh!ch the machine IS being
Especificz;ciones
—
Seccion del sintonizador
Gama
de
frecuencias,antena—
FM 87,5 – 108,0 MHz Antena
telescopic
AM, 530-1.710
kHz Aniena de barra de ferrita
Seccion
de la
grabadora
de casetes
Formato de pistas — 4 plstas, 2 canales / Gama de frecuenclas —
Cmta normal: 50 – 12,500 Hz (EIAJ) / Slstema de grabaclon —
Polanzac[on de CA/ Slstema de borrado — Borrado magnetico /
Cabezas — Cabeza de grabacion/reproduction
(1), Cabeza de borrado
(1)
Seccion
del reproductw
de discos
compactos
DISCO — Disco compacto / Metodo de exploration — Exp[orador
optlco sin contacto (laser de semiconductor)
Generales
Altavoces — TIpo cono de 100 mm (2), Tipo ceramica de 27 mm (2) /
Salida — Toma para aut Iculares (minitoma estereo) / Salida de
potencia — 2,5 W + 2,5 W (ElAJ7,00hmlos
CC)/ Akmentacion — 12
V CC utilizando echo pil,as de tamafio C (R14), 120 V CA, 60 Hz/
Consumo — 12 W / Dimenslones — 460 (An) x 184 (Al) x 261 (Prf)
mm / Peso — 4,1 kg (excluyendo Ias pllas) / Accesono — Cable de
alimentacion de CA (1)
o Las especificaclones y el aspecto externo estan sujetos a cambio
sin prewo awso
. Las especificaclones, la marca comercial, y el nombre del modelo,
estan marcados en la Iparte mfenor de la umdad
c=
Compruebe Ias Ieyes sobre derechos de autor en relation con Ias
grabactones de la radm, disco o clnta externa del pals donde vaya
AIWA CO., L.TD.
Printed
in Hong Kong
44-0316-1
Fiche technique
Partie tuner
Gammede frequencies, antenne— FM:
87,5 -108,0 MHz. Antenne
bge AM 530-1,710
kHz. Antenne barre de ferrite,
Partie cassette
Format plste — 4 pistes, 2 voles/ Gamme de frequencies — Bandes
normales: 50-12.500
Hz (EIAJ) / Systeme d'enregistrement
—
Polarisation par courant alternatif / Systeme d'effacement —
Effacement magnetlque / T&es —(1) tete d'enregistrement/lecture,
(1) t~te d'effacement
Partie Iecteur
de CD
Disque — D!sque
compact/ Methode de lecture — Scanner optlque
saris contact (rayon laser a semiconducteur)
Generalities
Haut-parleur
— Type en c6ne 100 mm (2), Type en ceramique
27
mm
(2) / Sorties – Prise casque (mini-jack stereo)/ Puissance – 2,5 W +
2,5 W (EIAJ i', Oohms cc) / Conditions d'ahmentation — 12 V cc avec
hult piles tallle C (R14), 120 V ca, 60 Hz/ Puissance absorbee — 12
W / Dimensions — 460 (1)x 184 (h) x 261 (p) mm / Poids — 4,1 kg
(saris Ies piles)/ Accessome – Cordon ca (1)
. Les caractensques et Ies Iignes exterieures sent sujettes a
modification saris preavis.
. Les caractenstlques, la marque de fabrique et Ie nom du modele
sent indlques au bas de I'appareil
COPYRIGHT
Blen
verifier Ies loIs relative aux drolts d'auteurs pour Ies
enregistrements depuls des disques la radio ou des cassettes
enregistrees clans Ie pays ou cet appareil est uthse.
NOTE
This equipment
has been tested and found to comply wth the Iimlts
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection
against
harmful interference
in a residential
installation.
This equipment
generates,
uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruc-
tions, may cause harmful
interference
to radio communications
However, there is no guarantee
that interference
will not occur In a
particular installation.
If this equipment
does cause harmful interfer-
ence to radio or television
reception,
which can be determined
by
turning the equipment
off and on, the user is encouraged
to try to
correct the interference
by one or more of the followlng
measures:
,,. Reorient or relocate the receiving antenna.
Increase the separation
between the equipment
and receiver.
Connect the equipment
into an outlet on a circuit different from
that to which the receiver is connected.
.... Consult the dealer or an experienced
radio/TV
technician
for
help.
CAUTION
Modifications
or adjustments
to this product, which are not expressly
approved by the manufacturer,
may void the user's right or authority
to operate this product
Publicidad
