Publicidad
Idiomas disponibles
Idiomas disponibles
VIBRATION + NOISE
REDUCTION
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as
well as wear personal protective equipment.
Take the following points into account to
minimize the vibration and noise exposure
risks.
•
Only use the product as intended by its
design and these instructions.
•
Ensure that the product is in good condi-
tion and well maintained.
•
Use correct attachments for the product
and ensure they are in good condition.
•
Keep tight grip on the handles/grip surface.
•
Maintain this product in accordance with
these instructions and keep it well lubricat-
ed (where appropriate).
•
Plan your work schedule to spread any high
vibration tool use across a longer period of
time.
EMERGENCY
Familiarize yourself with the use of this
product by means of this instruction manual.
Memorize the safety directions and follow
them to the letter. This will help to prevent
risks and hazards.
•
Always be alert when using this product,
so that you can recognize and handle risks
early. Fast intervention can prevent serious
injury and damage to property.
•
Switch off the product and remove the bat-
tery pack if there are malfunctions. Have
the product checked by a qualified profes-
sional and repaired, if necessary, before
you operate it again.
INTENDED USE
This 20V max cordless hammer drill/driver
is intended for drilling in wood and metal and
masonry materials with drill bits and driving
screws into wood and drywall with screwdriver
bits. Do not use it for other purposes.
EN - 6
WWW.SENIXTOOLS.COM
Publicidad
