WEGMAN JR-CB1 Manual De Uso página 18

Switching off the receiver
Press and hold the Home Button for 5s to switch off the receiver. If
the receiver has not been able to connect to a Bluetooth device
after 5 minutes, it will switch itself off.
Restoring the receiver to factory settings
To reset the receiver to factory settings, press the Home Button 5
times in succession.
Hanging the receiver in the
car
Stick the included metal plate on the
desired place in the car and hang the
receiver on the plate with the magnet.
What's in the box?
Magnet
3.5mm 3.5mm USB-C
Receiver
connector cable cable