Getac F110 Guia Del Usuario página 4

When a battery pack is inserted and the office
dock is connected to power, the Charge indicator
at the side of the office dock shows the charging
status of the battery pack.
•
lights amber when the battery is being
charged.
•
lights green when battery charging is
completed.
•
blinks amber when the battery charging
is in an abnormal state.
All battery packs, including the one(s) in the
charger and the ones inside F110 (when docked),
will be charged in parallel.
CAUTION: When inserting or removing the bat-
tery pack, be sure to do it in a straight up or
down manner. Never insert or remove the battery
pack in a slanted way because this can damage
the connector pins.
Safety Instructions
•
Use only the Getac battery pack model
BP3S1P2160-S / BP3S2P2160-S in the charger.
•
Do not insert any foreign object in any I/O port.
•
Do not touch the connectors of the office dock.
•
Do not attempt to make connections if there
is any object between the computer and the
office dock. Doing so could damage the
computer and the office dock.
•
Do not attempt to move the office dock when
it is connected to the computer.
•
If the computer malfunctions while the office
dock is connected, turn off the computer and
disconnect the office dock. Connect the AC
adapter to the computer and check to see if
the computer operates normally. If the com-
puter operates normally, the office dock may
be malfunctioning.
•
Do not place metal objects or containers of
liquid on top of the office dock. If metal
objects (such as paper clips and coins) or any
liquid spills get inside the office dock, fire or
electric shock may result. Immediately unplug
the power cable and remove the computer
from the office dock.
•
Unplug the power cord and remove the com-
puter from the office dock if any of the follow-
ing occurs:
– the office dock is damaged
– smoke is emitted
– an unusual smell is emitted
– the office dock is unusually hot
Continuing to use the office dock while any of
the above conditions are present may result
in fire or electric shock.
•
If a ground/earth pin attachment plug on the
AC power cord is provided, always plug the
2
cord into a grounded/earthed outlet. Do not
disable ground/earth pin of the plug/cord.
•
Do not place the product on an unsteady sur-
face.
•
Avoid exposing the product to water or an
electric shock may occur.
•
The charger will stop charging when input
voltage from the AC power line is unstable.
•
Disconnect the power cord from the charger
when not in use. When the charger is con-
nected with AC power, it is still in standby
mode even if the battery is fully charged.
Related documents (including this one) are
available at the Getac website:
https://support.getac.com/Portal/Page/809
Regulatory Information
Europe
Getac hereby declares that this pro-
duct complies with the EU Directive
2014/30/EU. The full text of the EU
declaration of conformity is available
at: https://support.getac.com/Portal/Page/809
Company name Getac Technology GmbH.
Kanzlerstrasse 4
Address
40472 Dusseldorf, Germany
Phone +49 (0) 211-984819-0
EU RoHS
Getac products meet the requirements of
Directive 2011/65/EU on the restriction of the
use of certain hazardous substances in electrical
and electronic equipment. For more information
about RoHS, go to:
https://www.getac.com/us/environment/
Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws
and regulations your product shall be disposed of
separately from household waste. When this pro-
duct reaches its end of life, take it to a collection
point designated by local authorities. Proper re-
cycling of your product will protect human health
and the environment.
Company name Getac UK Ltd.
Getac House, Stafford Park 12,
Address Telford, Shropshire, TF3 3BJ,
UK
Phone +44 (0) 1952-207-222