Sunny Health & Fitness Essential Interactive SF-RB422003 Manual Del Usuario página 9

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 7
Remove 2 Screws (No. 27), 2 Spring
Washers (No. 55) and 2 Arc Washers
(No. 14) from the Handlebar Post (No.
2) using Allen Wrench (No. 87).
Insert the Pulse Wire (No. 26) into the
front hole of the Handlebar Post (No.
2) and pull out from the hole on the top
of the Handlebar Post (No. 2).
Attach the Armrest (No. 57) to the
Handlebar Post (No. 2) with 2 Screws
(No. 27) , 2 Spring Washers (No. 55)
and 2 Arc Washers (No. 14) that were
just removed using Allen Wrench (No.
87)
Remove 4 Screws (No. 32) from the
Meter (No. 12) using the Spanner (No.
88).
Connect the Pulse Wire (No. 26) to the
Meter Wire A (No. 12a) and connect
the Sensor Extension Wire (No. 22) to
the Meter Wire B (No. 12b).
NOTA: To avoid damaging the wires,
please insert them into the Handlebar
Post (No. 2) before securing the Meter
(No. 12) onto the bracket.
Attach the Meter (No. 12) to the
bracket of the Handlebar Post (No. 2)
with 4 Screws (No. 32) that were just
removed using Spanner (No. 88).
THE ASSEMBLY IS COMPLETE!
8