Descargar Imprimir esta página

Jata CF1053 Instrucciones De Uso página 9

Cortafiambres metálico

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• This appliance has been designed for its intermittent use.
It must not be used uninterruptedly for periods of over 7
minutes. After the said period allow the appliance to cool.
• Do not use to cut bones or frozen food.
• This appliance has been designed for domestic use only.
• The cleaning and maintenance done by users, can not be
done by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid any danger.
INSTRUCTIONS OF USE
• Place the food slicer over a flat surface.
• Adjust the thickness required with the thickness regulator (3). The thickness indicator (2) may be used
as a guide.
• Place a dish or a tray on the left side of the food slicer.
• Place the food on the sliding carriage (4) and use the shield-pusher group (5) to press it slightly on to the
cutting guide (7).
• Plug the appliance into the mains.
• To start working the appliance push the on switch (1) to the I position (remains fixed) or II (pulse
functioning).
• With the food slicer working, move the sliding carriage shield forwards and backwards.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning the appliance make sure the item is unplugged from the mains.
• The shield-pusher group (5) may be cleaned with soap and water. Never use the dishwasher.
• To clean the sliding carriage (4), it can be removed from the body of the food slicer. Slide the carriage (4)
leftwards and press upwards the disassemble pusher (9) to take out the sliding carriage (4).
• To put it back, place it into the flanges guide, press the disassemble pusher and slide it rightwards.
• The blade (6) and the carriage (4), can be cleaned with a damp cloth.
• From time to time, it is convenient to remove the blade for a better cleaning. Unroll the blade axle (8) by
turning clockwise and take it out with care. To fix it again and place the blade axle (8) turn it anticlockwise.
• Do not use abrasive or chemical products, metallic scourers, etc. which may deteriorate the surfaces of
the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
9

Publicidad

loading