Jata CF301 Instrucciones De Uso página 10

• This appliance has been designed for domestic use only.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INTRUCTIONS OF USE
• Put the foldable platform (5) in horizontal position.
• Pass the cable cord through the hole in the base, so that the slicer is completely flat.
• Fit, pushing the guard (12) into the sliding carriage shield (6). (Fig. A)
• Situate the sliding carriage shield (6) in the platform (5). To do so, fit the two flanges situated in the
lower side of the carriage into the platform cavities and turn it as showed in the Figure B. Slide it
towards and backwards to leave it correctly fixed.
• To remove the carriage slide it totally backwards, then turn it outwards.
• Adjust the thickness required with the thickness regulator (4). The thickness indicator (3) may be used as
a guide.
• Place the slice-collector tray (11) on the left of the food slicer.
• Place the food the food on the sliding carriage (6) and use the shield-pusher group (7) to press it slightly
on to the cutting guide (9).
• Plug the appliance into the mains.
• To start working the appliance first press the safety button (2) with the thumb of your left hand and then
push
1-I button (1) with your index finger.
• While the food slicer is working, move the sliding carriage shield forwards and backwards.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning the appliance make sure the item is unplugged from the mains.
• The slice-collector tray (11), the shield-pusher group (7) and the platform (5) may be cleaned with soap and
water. Never use the dishwasher.
• The platform can be removed from the body of the food slicer for cleaning. Fold the platform and extract it
moving from the lower left side.
• To put it back firstly fit it from the right side and then press from the left side.
• The blade (8) and the carriage (6), can be cleaned with a damp cloth.
• From time to time it is convenient to remove the blade for a more through cleaning. To do so, turn the axle
of the blade (10) to the right about 90º and take it out with care. To put back in place, make the flanges of the
axle coincide and turn to the left.
• Do not use abrasive or chemical products, metallic scourers, etc. which may deteriorate the surfaces of the
appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
10