Jata JBSC2211 Instrucciones De Uso página 9

• VERY IMPORTANT: Do not immerse in water or any
other liquid.
• Do not use this appliance near the water
contained in bathtubs, washbasins or other
containers.
• When used in a bathroom, disconnect after use. The
proximity of water represents a danger even when the
dryer is off.
• To ensure a complementary protection it is advisable
to install in the electrical circuit of the bathroom a
residual differential current device (DDR) of differential
current of assigned capacity that does not exceed 30
mA. Ask your supplier for advice.
• Allow it to cool before storing.
• This appliance is designed for domestic use only.
• The cleaning and maintenance done by users, can not
be done by children without any supervision.
• If the power cord is damaged, it must be replaced
by the manufacturer or by its after-sales service or
similar qualified personnel in order to avoid a danger.
INSTRUCTIONS OF USE
• The hair dryer has a power selector (2) which, at the same time it is used to regulate
the different speeds and functions.
• Connect the appliance to the mains.
• Turn the speed and ON selector (2) to its right, any of its three positions (C, I or II).
-C: Cold.
-I: Minimum heat.
-II: Maximum heat.
• Turn left to remove the air intake grid (1)and remove all the impurities.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning disconnect the appliance from the mains.
• You may clean it with a damp cloth and dry carefully afterwards.
• Do not use abrasive or chemical products, such as metallic scourers, which may
deteriorate the surfaces of the appliance.
• It is very important to keep the air intake (1) and outlet grids always clean.
• Clean them frequently of any hairs or dust, which may get stuck to them.
9
JBSC2211