physa PHY SMC 02 Manual De Instrucciones página 18

3.2. Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
40 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
3.3. Assembling the device / Device use
After unpacking, carefully remove the massage chair. The unit is packaged as a whole machine; assembly is
not required. Simply plug in the power cord.
Once unpacked, find the main control switch on the back of the unit, plug in the power cord and switch on
the switch. The chair is now ready for use.
Sufficient space must be left at the front and back of the chair.
• Where the massage chair is placed, there must be enough space to recline the seat and raise the foot
section.
EN
1 – Power cord socket
2 – ON/OFF switch