Descargar Imprimir esta página

Jata JELI1201 Instrucciones De Uso página 11

Licuadora slim para frutas y verduras

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
• Never use your fingers to push the fruit or vegetables.
• Do not dissemble the appliance without making sure it is
switched off and wait for the filter to stop.
• There are risks of injury in case of improper use. You must
be careful when handling the cutting blades, when the jug is
empty and during the cleaning.
• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• Always place over a resistance surface and keep out of heating
elements.
• This appliance has been designed for domestic use only. Do not
use it for more than 10 minutes. After this period of time let it
to rest.
• Always disconnect it from the mains when you do not use it
and before assembling / disassembling or when cleaning.
• To unplug, pull from the plug, never from the cable.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
BEFORE ITS FIRST USE
• Clean and dry all the pieces of the juice extractor, except the main body (11). If necessary, clean it with a
slightly dampened cloth.
To disassemble the appliance
• Hold the lid (3) and turn counterclockwise to open it.
• Remove the lid (3) and take out the filter (4) and the separating unit (5). To remove the filter easier, we
suggest you to pull it out together the separating unit. Pull up the filter to remove it.
• For a better cleaning inside the filter, rotate counterclockwise by matching the indication located on the
side with the indication
stop so that it is correctly fixed.
To assemble the appliance
1. Place the separating unit (5) over the main body (11).
2. Fit the filter (4) pushing.
ATTENTION : Before switching on the appliance make sure the filter is correctly inserted in its place by
pushing firmly.
3. Place the pulp container (8) and juice container (9) in its place.
4. Place the lid (3). Doing this operation be sure that the flange of the lid fits properly in the gap of the
separator. To do this, rotate clockwise by matching the tab with the indication .
to release it. Then rotate clockwise until the matches the position
11
and make a

Publicidad

loading