Publicidad
Idiomas disponibles
Idiomas disponibles
Video
Aspect Ratio
The shape of the television or monitor may not match
the shape of the movie frame. To avoid distortion on
older televisions, you may need to change the way
in which the image is displayed. Televisions use a
4:3 aspect ratio; high-definition televisions use 16:9
aspect ratio (as do movies).
Note: You may need to read your television's manual
in conjunction with this section in order to achieve the
best results. Some discs do not allow the aspect ratio
to be changed and you will therefore have to change
the aspect ratio on the TV.
Change your settings when playback is stopped; you
cannot do this while playing back a disc.
4:3/PS This mode is used with 4:3 televisions. 4:3
images are displayed normally. When showing 16:9
programmes, the full height of the screen is displayed
and the left and right part of the image are cut off.
4:3/LB This mode is used with 4:3 televisions. 4:3
images are displayed normally. 16:9 images are
visible at their full width, but there are blank areas at
the top and bottom of the screen.
16:9 Use with a 16:9 wide television.
Some wide-screen discs that do not permit the
Pan Scan mode playback are automatically played
in Letter Box mode.
Depending on the DVD, 4:3 Letter Box may be
selected automatically instead of 4:3 Pan Scan
and vice versa.
If 16:9 (Wide) is selected and a normal TV is
connected, 16:9 content will appear distorted
during playback (objects look thin).
TV system
NTSC Select this when the unit is connected to an
NTSC TV.
PAL Select this when the unit is connected to a PAL
TV.
Auto Select this when the unit is connected to a Multi
TV.
Misc
Using The Default Setting
All the items in the SETUP menu will be reset to the
default settings.
Screen Saver
On
In DISC or USB source mode, the screen saver
starts up if nothing is played back and no operations
are performed for a few minutes.
Off
The screen saver does not start up.
Listening To The FM Radio
Tuning in a Station
1
Press the FUNCTION button on the front panel or
press the TUNER button on the remote control.
2
Press the
/
buttons, the frequency changes
down or up automatically until a station is found.
You also can press
station manually.
Presetting Stations
You can preset up to 20 FM stations.
Program radio stations automatically
Press and hold the PROG button for 2 seconds to
activate automatic programming. All available
stations are programmed in the order of waveband
reception strength.
-
The first programed radio station is played
automatically.
Program radio stations manually
1
Tune in the desired station, then press the PROG
button.
2
Press the
buttons to select the preset
H/G
number.
3
Press the PROG button to store the station.
4
Repeat above steps 1 to 3 for every station that
you want to store in the memory with a preset
number.
Tune to a Preset Radio Station
Press the
or
buttons to select the desired preset
H
G
number.
RDS Timer Sync
When a RDS station is found, press and hold the OSD
button to sync the RDS time of RDS station. Then you
may view the RDS time if you press the OSD button on
the remote control.
Other Features
Set the alarm timer
In standby mode, use the daily timer setting to turn
the unit on automatically at a certain time everyday.
However, the clock must be set correctly for the timer
function to work.
1
In standby mode, press and hold the TIMER
button for about 2s, then press
select an alarm sound source: iPod/iPhone/iPad,
FM Tuner, USB and DISC.
2
Press the TIMER button, the volume indicator will
blink. Set the alarm volume with the
3
Press the TIMER button, the hour indicator will
blink. Set the hour with the
/
buttons to search a
/
buttons to
/
buttons.
button or
button.
27
Publicidad
