adhesive (fig. 7) using a 4 mm
masonry bit.
• Insert the wall plugs in the holes
and fix the support using the
screws, ensuring that the Alessi
logo on the steel plate is positioned
correctly (text horizontal).
• Place the outer thermoplastic resin
disc on the wall bracket to cover
screws and magnets. (fig. 8).
ATTENTION!
To perfectly mate the two parts, insert
the small protrusion on the inside
of the disk into the groove on the
holder.
The magnetic attraction between the
wall bracket and the back of the scale
simplifies hanging it up. (fig. 9).
When you want to use the scale, take
it in both hands and remove from the
wall bracket.
Rest your thumbs on the steel plate
and pull towards you (fig. 10).
LOOKING AFTER
THE SCALE
• Clean the outer surface and the
tempered glass top of the scale
using ONLY a damp cloth, then
dry thoroughly with a soft cloth
(fig.
11).
•
DO NOT
use solvents, harsh
chemicals or abrasive cleaning
products.
•
immerse the scale in
DO NOT
water and do not place in the
dishwasher
(fig.
WARRANTY
This product is covered by a two-year
warranty from the moment of sale.
The warranty covers all
Istruzioni Bilancia da cucina MDL16 ok.indd 15
Istruzioni Bilancia da cucina MDL16 ok.indd 15
12).
manufacturing defect. Any damage
caused by accidental impact or
improper use is therefore excluded.
Alessi declines any responsibility for
damage caused by improper use.
WARRANTY inside the packaging.
DISPOSAL
At the end of the product's life cycle,
be sure to dispose of the device
properly by contacting a specific
waste disposal centre.
Disassemble all components to
dispose of them in compliance with
any applicable laws that apply in your
country.
WEEE inside the packaging.
BATTERY DISPOSAL
The battery inside must NOT be
removed by the final customer, but
will be removed directly by the
specific disposal centre.
FOOD SAFETY
This appliance is made with materials
designed for contact with food products
and is compliant with applicable laws.
15
08/09/23 15:11
08/09/23 15:11