Bigben PARTY PARTYBTHPMAX Manual De Instrucciones página 15

10.【AUX】: AUX audio input.
11.【USB】: Insert a USB key to play MP3 music tracks (maximum capacity for USB of
64 GB, does not work beyond 64 GB).
12.【TF】: Insert a micro-SD card to play MP3 tracks (maximum capacity for 64 GB micro-
SD card, does not work beyond 64 GB).
13. 【MIC】: Plug in a wired microphone for karaoke mode.
14. 【Charging indicator light】: The red light goes on during charging, and goes out when
charging is complete.
15.【DC IN】: Charging port: Connect a USB-C charging cable to the mains adapter for
charging.
Connecting a Bluetooth device.
Turn on to enter Bluetooth mode. Then search for PARTYBTHPMAX in your mobile device
Bluetooth settings. If a message asks you for the pairing password, enter '0000' and click
confirm connection.
Pairing a Bluetooth device
1. In Bluetooth mode, press and hold the M/TWS button on each speaker at the same
time. An audio chime will be heard. Then connect your device (phone, tablet, etc.) to
PARTYBTHPMAX. Long press again to disconnect the paired device.
2. The optimal connection distance between two Bluetooth speakers is about 5 metres.
How to record
1. Insert a micro-SD card or USB media.
2. Insert a wired microphone (into the microphone socket).
3. Short press the Record button to start recording your voice. Short press again to stop
recording and listen to it. You can navigate between recordings using the << and >> buttons,
and delete a recording by holding the record button for 5 sec. To return to USB or Bluetooth
drive mode, press the Mode button. Please note: You cannot record music in this mode.
Loading Instructions
1. To preserve battery performance, avoid using the appliance while charging.
2. To charge the device, use the 18 W charger with the USB-C charging cable. The red
light goes on during charging, and goes out when charging is complete.
3. If the battery level is below 15%, a low battery alarm will sound.
- EN 15 -