B
Useful information
Maintenance
Turn off and unplug the appliance before cleaning it.
Periodic cleaning
Use a soft cloth, dampened with warm soapy water or
household detergent. Do not use a metal pad, abrasive or
chemical products/tools, or a hard-bristled brush to clean
the appliance.
Monthly cleaning of the grease filter
ESSENTIAL: Clean the filter every month to prevent a risk of
fire. The filter collects the fat, fumes and dust; it therefore
has a direct impact on the efficacy of the extractor fan. If it
is not cleaned, the fat residue (potentially inflammable) will
block it. Clean it using a household detergent.
Annual cleaning of the activated carbon filters
ONLY applicable to the apparatus installed in recycling mode
(no air extraction outdoors). This filter traps the odours and
must be changed at least once a year, depending on the
frequency at which the extractor fan is used.
• With regard to the information for installing and replacing
the bulb, refer to the following paragraph of the instructions.
• Use a type DBR-2-H-120 lightbulb or an equivalent
alternative (code ILCOS D, according to standard IEC 61231).
– LED modules, with integrated ballast
11
EN