Observation
Cannot preset stations
No sound
FM: Static sound
DAB: Burbling/intermittent cut-out
Desired station not found
Display shows 'No Service'
Display is blank
Time and Date not setting automatically
Sound is distorted
Other problems/functional issues
Troubleshooting
Potential Cause/Solution
The station is not tuned in properly. Please
perform a re-scan for available stations or
manually scroll through available stations.
The station is not tuned in properly. Please
perform a re-scan for available stations or
manually scroll through available stations.
Signal reception is low. Adjust the aerial or
move the unit to a location with a stronger
signal. Re-scan stations and or/ a factory
reset.
Weak signal. Use the manual tune function
and try rescanning in a different area.
There is no DAB coverage in your area, or
poor reception. Adjust the position of the
aerial, or move the unit to a location with a
stronger signal.
This may occur if the broadcaster changes
the label of a service or removes a label
while tuned. The radio will try to retune or
perform a scan.
Go to DAB mode and this will automatically
set once a scan is performed. Alternatively,
set in your 'Settings'.
The volume is too high. Adjust the volume
control.
Please perform a factory reset of the radio
in your settings.
EN
19