Gewa UP395 Guia De Inicio Rapido página 27

3
ASSEMBLY INSTRUCTIONS UP395
In this section we will show you how to easily set up yourGEWA digital piano.
For the assembly you need:
• size 2 Phillips screwdriver
• second assisting person
Do not firmly tighten the recessed head screws until all parts of your digital piano are
NOTE
aligned. Make sure you assemble your digital piano on level ground.
Now lets start assembling your GEWA digital piano.
1. Unfold the pedal cable (not shown) and screw the adjustment screw (10) into the pedal
2. By using the phillips screws (7b), connect the side panels (4 and 5)
3. Then attach the rear panel (2) with phillips wood screws (8).
4. Now place the keyboard (1) onto the base from above. The metal guides of the side
5. Now screw the headphone hanger (9) onto the left underside of the keyboard by using a
6. Then align your digital piano and tighten all of the screws.
7. Place your digital piano at the desired location and make sure that the adjustment screw
board (3).
to the pedal board (3).
panels have to slide into the respective groove and the counterpart. Make sure that the
angels of the side panels are guided into the millings of the keyboard. Then secure the
keyboard with 2 screws (7a) and 2 screws (7b).
phillips screw (7a).
(11) touches the floor as shown below.
ASSEMBLY INSTRUCTIONS
UP395
27