OWNER'S MANUAL | ASSEMBLY GUIDE
ASSeMBlY INSTRUCTIoNS
TOOL NEEDED:
TOOLS NEEDED:
Find a large, clean area to assemble your appliance�
&
#3 Phillips head screwdriver
#3 Phillips head screwdriver &
Remove all packing material before assembling�
Adjustable wrench
Sharp edges. Wear gloves while assembling.
NOT INCLUDED:
NOT INCLUDED:
lPG cylinder
lPG cylinder
9 kg)
9 kg)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
o o
lPG cylinder must include collar to
lPG cylinder must include collar to
protect lPG cylinder valve.
protect lPG cylinder valve.
With the help of another person, remove the griddle body
STEP 01
from the packaging and lay it upside down on a smooth, flat surface�
Unlatch and unfold the legs to their vertical position, then use two
(2) small thumb screws
ends of the left leg assembly�
NOT INCLUDED:
NOT INCLUDED:
22" griddle base
17" griddle base
06
TOOL NEEDED:
TOOL NEEDED:
Adjustable wrench
#3 Phillips head screwdriver
CAUTIoN
NOT INCLUDED:
NOT INCLUDED:
AA battery
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
[e.]
to attach the two (2) wheels onto the
NOT INCLUDED:
22" griddle base
TOOL NEEDED:
TOOL NEEDED:
5mm Allen wrench
Adjustable wrench
Heavy pieces. Two people should assemble this appliance.
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
NOT INCLUDED:
NOT INCLUDED:
TOOLS NEEDED:
one (1) AA battery (for ignition)
AA battery
#3 Phillips head screwdriver &
Adjustable wrench
optional four (4) AA batteries
(for the motor)
Use one (1) large thumb screw
STEP 02
shelf to the right leg assembly�
Use one (1) medium thumb screw
the stabilizing shelf to the left leg assembly�
Note: This shelf is integral to the stability of the appliance
while in use�
NOT INCLUDED:
lPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
lPG cylinder must include collar to
lPG cylinder must include collar to
[h.]
protect lPG cylinder valve.
protect lPG cylinder valve.
NOT INCLUDED:
17" griddle base
Model: 2311
TOOL NEEDED:
5mm Allen wrench
CAUTIoN
NOTICE
TOOL NEEDED:
NOT INCLUDED:
one (1) AA battery (for ignition)
#3 Phillips head screwdriver
optional four (4) AA batteries
(for the motor)
ELECTRIC REQUIREMENTS:
120V 60Hz
[h.]
to attach the stabilizing
[i.]
to attach the lPG support and
NOT INCLUDED:
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
NOT INCLUDED (OPTIONAL):
Two (2) d batteries
[i.]
NOT INCLUDED:
BLACKSTONEPRODUCTS.COM/SUPPORT
22" griddle base
Plac
surfa
DO N
cook
TOOL N
Adjust
DO N
NOT IN
AA bat