Craftsman 917.379611 Manual Del Usuario página 18

TROUBLESHOOTING CHART
PROBLEM CAUSE
1. Cutting h eight too
low.
2. Lift on blade worn off.
3. Catcher not venting air.
Grass catcher
not filling (If so
equipped)
Hard to push 1. Grass is too high or wheel
height is too low.
2. Rear of lawn mower
housing or cutting blade
dragging in grass.
3. Grass catcher too full
4. Handle height position not
right for you.
CORRECTION
1. Raise cutting height.
2. Replace blade.
3. Clean grass catcher.
1. Raise cutting height.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle height to
suit.
18