Fan Speed Button; Mode Button - branatech PAC17-12-412 Manual Del Usuario

FAN SPEED BUTTON

This button is to adjust the wind speed button, but in the dehumidification, sleep mode, you
can not adjust the wind speed.
In the Ventilation mode of cooling, heating, ventilation and automatic mode, you can adjust
the wind speed. Press the wind speed button, the light switch instantly, but the wind speed
delay 2S to switch. (Long press the wind speed key 3S to open the child lock function, all
button locked, child lock button light. Long press the wind speed button 3S again, and remove
the child lock function, then unlock all functional button, the child lock light turns out.)

MODE BUTTON

The first time the machine is powered on, the default is automatic mode.
Press this button to switch between cooling mode, heating mode, automatic mode, dehumidi-
fication mode and ventilation mode. Pressing the button every time, the buzzer will beep once.
In the auto mode, the cycle will be switched, the indicator light will be activated, and the mode
will be switched after 5s delay.
ADD BUTTON
The original set temperature is immediately displayed when pressed this button, and the tem-
perature value flashes. Each time the buzzer sounds, the temperature is set to "plus one".
After stopping the operation, the temperature set value flashes 5S to confirm the set value and
return to the current temperature value. The digital display order when pressing the button is
as follows:
16→17→18→19→20→21→22→23→24→25→26→27→28→29→30→31→32
After pressing the timer button to enter the timer setting state, each time the buzzer
sounds, set the timing "plus one":
... ... ... ...
0→1→2 →→23→24→0→1 Cycling in this way.
18