Publicidad
Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
10.1
Description of the cabinet
This line of cabinets is suited to the preservation
and display of fresh foods such as fruit and
vegetables, dairy products, cured meats and
fresh meat.
TEMPERATURE CLASS (according to EN ISO
23953-2): 3M1, 3M2.
The general characteristics and the dimensions
are illustrated in the figures and in the sections
contained in "General description" (to pg. "7").
10.2
Transport and handling
The cabinet is contained in a specific packaging
equipped with a platform for handling with
forklift trucks.
To transport and handle the cabinet use:
• Exclusively a dedicated or equivalent
platform
• A manual or electric forklift suited to lifting
the cabinet, with characteristics that
comply with current Standards
The handling operations must be carried out by
qualified staff able to assess weights, lifting
points and most suitable means in terms of
safety and capacity.
10.3
Receipt and storage
Check conditions of the packaging before
accepting the cabinet from the carrier.
If there is obvious damage in the packaging:
• Remove the packaging of the cabinet in
the presence of the carrier.
• Sign
the
delivery
reservation
N°DOC. UM000728 REV. "A" - 22/11/23
COMFORT MAXI
COMFORT MIDI
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
10.
USER INDICATIONS
The manufacturer shall not be held responsible
for any damage caused due to transport or
incorrect storage of the cabinet.
The cabinet must be stored in a place sheltered
from sun and weather, with a temperature of
between -25°C and +55°Cand a relative
humidity of the air between 30% and 95%.
10.4
The cabinet is not designed to be installed
outdoors.
For a correct operation of the cabinet, ensure
that it is positioned:
Provide the space necessary for the use of the
cabinet by the client.
The ambient conditions in which the cabinet
should be placed are set out in "Ambient
conditions".
10.5
An omnipolar disconnector switch must be
installed upstream of the cabinet. This must
have:
The disconnector switch must be placed in a
position that makes it easy to operate in
emergency situations (maximum distance of 3
m).
document
with
Before connecting the cabinet, ensure that the
supply voltage corresponds to the rating plate
data of the cabinet. To guarantee smooth
operation, the maximum voltage variation must
be between +/- 6% of the nominal value.
Installation and ambient
conditions
• On a levelled floor ("Fig. 13").
• Far from heat sources, from the direct
radiation of the sun, from doors, windows,
fans and air vents ("Fig. 14").
Electrical connection
• Minimum distance of the contacts of 3 mm
• Adequate breaking power
17/22
User manual
IT
FR
EN
EN
DE
ES
PT
Publicidad
