Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Model
Battery capacity
Battery type
Compatible charger (not included)
Charger input
Maximum charging time
Weight
NOTE: GREENCUT reserves the right to modify the specifications of the
device without prior notice.
USING THE PRODUCT
FUEL GAUGE
To display the amount of charge left in the battery, press the charge level indicator button.
•
The battery pack charger level is between 0%-99%. 99% meas fully charger.
•
Press the indicator button one time,the display shows the Percentage of battery charger status.
•
Press two times quickly it shows the cell temperature degree centigrade
•
when the battery capacity reduced to 0%,it can't discharge on tool anymore need put back
on the specified charger to charge.
BATTERY PROTECTION FEATURES
40V LITHIUM-ION batteries are designed with features that protect the LITHIUM-ION cells and
maximise battery life. If the tool stops during use, the following may be the causes:
a. The maximum current draw of the battery has been exceeded, causing it to automatically stop
powering the tool. Release the trigger to reset the tool and pull the trigger to resume operation.
b. Excessive temperatures will cause the battery to stop powering the tool. Feel the battery pack;
if it is too warm, allow it to cool down.
If the tool still does not work, recharge the battery.
BATTERY
BAT-40V-2AH
2.0 Ah
40 V DC Lithium-ion
CHAR-50HZ
100V-240 V
50-60 Hz AC only
60minutes/40minute
0,98 Kg
BAT-40V-4AH
4.0 Ah
40 V DC Lithium-ion
CHAR-50HZ
100V-240 V
50-60 Hz AC only
120minutes/60minute
1,67 Kg
15
EN
Publicidad
