Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING THE CARTRIDGE (see page 20)
1.
Remove the stylus.
2. Make electrical connections: right channel (R), red
lead; right ground (RG), green lead; left channel (L),
white lead; left ground (LG), blue lead.
3. Mount the cartridge:
A. In a headshell with unthreaded holes or slots.
0. I n a headshell with threaded mounting holes.
4. Cartridge Leveling: Check that the front and side
of the Alignment Stylus is parallel to a record on
the turntable. If necessary, insert spacers or a
shim, or rotate the headshell.
5. Overhang Alignment: Place the Overhang Gauge
over the turntable spindle, and adjust the position
of the cartridge in the headshell until the Align-
ment Stylus is parallel to the Gauge markings.
6. Tracking Force: This cartridge is designed for an
optimum tracking force of 1.0 gram (1.25 grams
m a x i m u m ) . The v i s c o u s - d a m p e d D y n a m i c
Stabilizer exerts a force on the record of 0.5 grams
that must also be accommodated in the total tone
arm tracking force setting. Therefore, use the
following settings.
To obtain this force
Set the arm tracking
at the stylus tip
force adjustment to
Optimum 1.0 gram
1.5 grams
Maximum 1.25 grams
1.75 grams
To use an external gauge such as the Shure SFG-2
Stylus Force Gauge to set the tracking force, lock
the Dynamic Stabilizer "up", and set the tracking
Publicidad
