Tascam MA-BT240 Manual Del Usuario página 9

Trademarks and copyrights
o The duplication, broadcast, showing, cable broadcast,
public performance and rental (including without
charge) of protected content without permission is
prohibited by law.
o The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by TEAC Corporation is under license.
o TASCAM is a registered trademark of TEAC Corporation.
o Other company names, product names and logos in this
document are the trademarks or registered trademarks of
their respective owners.
Conventions used in this manual
We use the following conventions in this manual.
o As necessary, additional information is provided under
TIP, NOTE and CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
ATTENTION
Failure to follow these instructions could result in damage to
equipment.
V CAUTION
Failure to follow these instructions could result in injury.
Precautions for placement and use
o The guaranteed operating temperature range of this unit
is 0–40°C.
o Do not install this unit in the following types of locations.
Doing so could make the sound quality worse or cause
malfunction.
Places with significant vibrations
Next to a window or in another location exposed to
direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
o Install the unit so that it is level.
o When placing it on a table or shelf, for example, attach the
rubber feet included in the same packaging to the bottom
of the unit to provide sufficient airflow. In addition, ensure
that there is enough open space (at least 10 cm) behind,
above and to the sides of the unit.
o When mounting this unit in a rack, leave at least 1U
between it and other equipment above and below
and ensure sufficient airflow. Furthermore, ensure
sufficient airflow by covering the open spaces with
ventilation panels or leaving them open, for example.
If the temperature inside the rack is high, open the
back of the rack and keep it at least 10 cm away from
walls and the ceiling and ensure ventilation. If the
back of the rack cannot be opened, install a fan kit or
other ventilation equipment.
Notes about power supplies for
US/Canada
Insert the included power cord all the way into the AC IN
connector.
This unit can be used with AC 100–120V (50/60Hz) power
supply voltage.
Hold the power cord by its plug when connecting or
disconnecting it.
V CAUTION
o The included power cord has a rated voltage of 125V AC.
It cannot be used with over 125 V.
o The 3-prong to 2-prong adapter is for Japan. It is not for
use in the USA.
TASCAM MA-BT240
9