afx light HYBRID-360LED-FC Manual De Uso página 10

Reset Default
Ethernet Function
Option
Pan/Tilt
UI Set
Temperature
Informa-
tion
Software version
Reset
Manu
Channel
ADV
(Advanced)
Calibration
(Access code
0888)
MAINTENANCE AND CLEANING
DANGER! DISCONNECT FROM THE MAINS BEFORE STARTING ANY MAINTENANCE WORK
It is essential that the fixture is kept clean and that no dust, dirt or smoke fluid residues are allowed
to build up on or in the fixture. Failure to do so will significantly reduce the luminaire's light output.
Regular cleaning will not only ensure maximum light output but will also give the fixture a long and
reliable life. A soft, lint-free cloth moistened with any good glass cleaning fluid is recommended.
Never use alcohol or solvents!
The front lens should be cleaned weekly as smoke fluid tends to build up and reduce light output
very quickly. The cooling fans should be cleaned monthly.
The inside of the fixture should be cleaned at least once a year with a vacuum cleaner or blower. Use
a soft brush and vacuum cleaner to remove dust and dirt from the fans and cooling vents.
IMPORTANT! Check the air filters regularly and clean them before they become clogged!
Clean two air filters located in the fixture covers and two in the fixture base. Use a vacuum cleaner,
compressed air or you can wash them and put them back dry.
After replacing the air filters, reset the elapsed time counter in the Information menu (Information
-> Air filters -> Elapsed time).
SPECIFICATIONS
Power supply ................................................................................................................... 100-240V~ 50/60Hz
Power Consumption .................................................................................................................................. 500W
EN 10
Yes/No
ArtNet to DMX (On/Off)
Device IP addr: 192.168.001.201
Host IP Addr: 192.168.001.001
Universe: 000
Share signal: (On/Off)
Reverse Pan (on/off)
Reverse Tilt (on/off)
Select Pan 630/540/360
Select Tilt 270/180/90
Totem mode OFF/CEN./R/L
Mic sensitivity 0-99%
OFF signal mode (On/Off)
HalfColor Wheel (On/Off)
XXX°C/F°
V1.0-V9.9
Total reset
Pan/Tilt reset
Colour reset
Gobo reset
Other Resets
PAN=XXX...
PAN=XXX...
Reset to default values
Connect ArtNet to DMX
Setting Device IP address
Setting Host IP address
Setting the Universe Send ArtNet
signal to DMX
Reverse Pan
Reverse Tilt
Select Pan
Select Tilt
Restricts pan & tilt motion
Mic sensitivity
Off at original status and ON at
reset status if no DMX signal
Half Colour (default OFF)
Current temperature
Software version
Reset All
Reset Pan/Tilt
Reset Colour
Reset gobo
Reset the others
Manual channel control
Calibration
© COPYRIGHT LOTRONIC 2023