Create Bamboo Manual De Instrucciones página 7

• Do not use the battery after it has been submerged in water.
• If the battery is used incorrectly, it may explode or leak, resulting in
burns and other personal injuries.
• If the battery leaks, be careful and dispose of it immediately in accord-
ance with local law and waste management regulations.
• Any attempt to remove or replace the battery will damage the product
and void the product warranty.
1. Charging case
2. Indicator light
3. Case charging area
4. USB charger
5. Function key
• ATTENTION! Before the first use remember to remove the protective plastic that is in the
area of the charging connections of the headphones.
Automatic ignition:
• After opening the charging case, the earphones will turn on automatically, no need to take
the earphone out of the case.
Auto power off:
• Put the earphones into the charging case and close the lid, the earphones will turn off and
charge automatically.
• When the headphones are turned on and there is no connection to the Bluetooth device, the
headphones turn off automatically after 5 minutes.
Bluetooth pairing:
1. Open the cover of the charging case and the earphones will turn on automatically.
2. The white light on the left earbud will flash rapidly during pairing.
3. Please open the bluetooth setting of your mobile phone and find the device, click the
device named "EARPHONES BAMBOO - CREATE" to connect.
4. After the headset is successfully paired to your device, the white light on the headset
will turn off.
PARTS LIST
1
2
BEFORE FIRST USE
POWER ON AND PAIRING
3
E NGLI SH
4
5
7