Descargar Imprimir esta página

Husqvarna RIGG 900 FI Manual Del Usuario página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Personal protective equipment
WARNING:
instructions that follow before you use the
product.
Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment and when to use
them.
Regularly do a check of the condition of the personal
protective equipment.
Use an approved protective helmet.
Use approved hearing protection.
Use approved respiratory protection.
Use approved eye protection with side protection.
Use protective gloves.
Use boots with steel toe-cap and non-slip sole.
Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
Fire extinguisher
Keep a fire extinguisher near during operation.
Use a powder fire extinguisher or a carbon dioxide
fire extinguisher.
Work area safety
WARNING:
instructions that follow before you use the
product.
It is the responsibility of the operator to analyze the
surface to be treated. The user should make a risk
assessment on the basis of the information obtained
about the surface to be treated and take proper
precautions for the work to be performed.
Do not use the product in fog, rain, strong winds,
cold weather, risk of lightning or other bad weather
conditions.
Look out for persons, objects and situations that can
prevent safe operation of the product.
Do not use the product in areas where fire or
explosions can occur. The product creates sparks
and flammable material can create ignition with the
dust or fumes.
Keep children, bystanders and animals away from
the work area and at a safe distance from the
product. Safe distance is 15 m/49 ft.
Make sure that only approved persons are in the
work area.
Keep the work area clean and fully illuminated.
Cluttered or dark areas invite accidents.
6
Read the warning
Read the warning
Make sure that there are no cables or hoses in the
operation direction of the product.
Make sure that there are no obstacles that the
product or the shot blaster can get caught on.
Make sure that uneven surfaces, such as welded
seams or floor joints, do not stop the product.
Make sure that there is sufficient airflow in the work
area.
The operators that do not stay on ground level when
the product is assembled must be certified to work
on altitudes and use a fall protection system.
Make sure that you know the maximum work load of
the construction that will hold the rigging system and
the product.
Electrical safety
WARNING:
shocks from electrical products. Do not use
the product in bad weather conditions. Do
not touch lightning conductors and metal
objects. Always use the product as given in
this operator's manual to prevent injury.
WARNING:
with RCD (residual-current device). An RCD
decreases the risk of electrical shock.
WARNING:
unprotected parts in the power unit. Always
disconnect the power plug before you open
the door to the electrical box.
CAUTION:
product or generator must be sufficient and
constant to make sure that the motors
operate without problems. Incorrect voltage
causes the power consumption and the
temperature of the motors to increase until
the safety circuit releases. The dimension
of the power cord must agree with national
and local regulations. The dimension of the
mains socket must agree with the amperage
for the electrical socket and extension cable
of the product.
If the power mains has higher system
resistance, short voltage drop can occur
when the product is started. This can
influence the operation of other products, for
example flicker on the lights.
The power plug must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
There is always a risk of
Always use a power supply
High voltage. There are
The power supply from the
2156 - 001 - 08.02.2024

Publicidad

loading