Mach Power EB-SMARTCHARGER16 Manual Del Usuario página 5

ENG
When they overlap, it is necessary to remove the type c hub of the cabinet below, connect the two
structures with three screws. At the end, reconnect the hub.
2. WIRING
2.1 Connect the power cable
Plug the cord into the electrical outlet.
Supported Rated Input Voltage: AC 110-240V 10/16 A
2.2 Connect the adapter
Open the PDU storage compartment, connect the adapter to the PDU, so that the laptop can be
directly connected to the adapter for charging.
2.3 Mobile Slots
1. Remove the card as shown in figure.
2. Remove the Slots manually.
5