UNPACKING
!
WARNING! The product and
the packaging are not children's toys!
Children must not play with plastic
bags, sheets and small parts! There is a
danger of choking and suffocation!
Unpack all parts and lay them on a flat,
stable surface.
Remove all packing materials and ship-
ping devices if applicable.
Make sure the contents of the box are
complete and free of any damage (See
Parts, Parts in the box). If you find that
parts are missing or show damage do
not use the product but contact your
dealer. Using an incomplete or dam-
aged product represents a hazard to
people and property.
Clean the product and accessories
before first use as described within this
instruction manual.
ASSEMBLY
!
WARNING! Only assemble the
product as described within this in-
struction manual. Do not use parts that
are not recommended by the manufac-
turer.
Screw off the preassembled spray lance
nut (4a) from the trigger unit (8) and
take out the spray lance cone (4b) and
spray lance O-ring (4c).
lance (4) with the spray lance nut (4a),
the spray lance cone (4b) and the spray
lance O- ring (4c) onto the pressure
valve (7). Ensure the spray lance O-ring
(4c) sits properly in the spray lance cone
(4b) and the spray lance cone (4b) slides
through the spray lance nut (4a).
Screw the pressure valve (7) with
the pressure valve nut (7a) onto the
trigger unit (8). Ensure the trigger
unit O-ring (8a) sits properly inside
the tube, facing the right direction.
BEFORE USE
This product is designed for spraying
liquids such as water, cleaning and
disinfection agents, building agents,
alkaline detergents, and care products
inside the house, garden, and green-
houses. It is only suitable for home use.
Any other use might lead to damaging
the product or personal injury.
Suitable for:
• Plant protection products approved
• Mixtures in concentrations given in
Screw the spray
• Solvents
• Acids
• Surfactants
• Impregnation agents
• Flammable liquids and oil
• Fluids containing solids
62
by local/national regulatory authori-
ties for plant protection products for
use with this kind of product
the instructions from the sprayed
medium manufacturer
Not suitable for: