Garden Wood Furniture 987KFSI1 Instrucciones De Montaje página 3

ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Phillips Screwdriver, Slotted Screwdriver,
STEP 1
A
x8
B
x8
C
x4
D
x4
F
1. Spread glue in the elongated holes in the Top Support (2). Insert the Legs (4),
with the holes for the barrel nuts facing in, into the elongated holes. Fasten
Legs in place with a Barrel Bolt (A) through the Top Support into a Barrel Nut
(B) in each leg.
Attach the Base (3) to the other end of the Legs in the same way.
Tap Levelers (C+D) into the holes in the bottom of the Base.
987KFSI1 36" Pub Table
Mallet or Padded Hammer, Outdoor Wood Glue
C
D
F
A
987KFSI1 – Page 3