COMETA Foxydry Vivo Manual De Instrucciones página 21

2
IRONING BOARD START UP
• Plug the power supply cord from your iron/steam generator into the
auxillary socket built-in to the ironing board.
• Plug the power supply cord from your ironing board into a 13amp
wall socket and switch the socket on.
• Switch the appliance on using the power on/off switch (3). The power
on/off switch activates the ironing board and the generator or steam
iron plugged into the auxillary socket.
3
SUCTION/BLOWING FUNCTION
AND HEATING OF THE BOARD
The suction absorbs the excess steam, which
is no longer used after the ironing process. The
suction helps hold the garment on the ironing
surface and helps to dry the garment. Garment
ironed with this board are ready to be placed
straight in the wardrobe without further airing.
The heated ironing surface stays dry, and keeps the steam hot so
that it passes through the board to be expelled without condensing.
WARNING! If the 'SELECTOR SWITCH' is in the "0" position
(none of the two functions between suction and blowing is active),
use your iron in dry-ironing mode (without steam), to avoid the
condensation inside the board.
SUCTION FUNCTION
With the suction function, light fabrics (silk etc.) can be held in
place on the ironing board, preventing them from slipping.
The suction function cools and sets the fabric during ironing,
guaranteeing no wrinkles.
• For the suction function set the selector switch on position "I" (4).
• With the switch in position "0", the suction function is switched off.
SELECTOR SWITCH
Starting the Appliance
9