Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL specifications:
Voltage: DC12V
Operating current: 11A
Max. operating power: 130W
Operating temperature: 0ºC to +40ºC AC
AC charging time: 3 hours
DC charging time: 3 hour
Max. running time: 15 min
Battery: Lithium 11.1V, 2500mAh
Length of the 12V power supply cord: 3m
USE:
ATTENTION:
• This appliance is intended for dust and dirt removal. Do not use the appliance for any
other purpose.
• Do not immerse - Do not expose the appliance to liquids, moisture or splashes: in case
of contact with water or any other liquid, do not use the appliance – have it checked by a
qualified service technician.
• Do not use the appliance to vacuum materials likely to burn (cigarette butts, embers,
matches...).
• Keep the cable and appliance away from heat sources, oil and fats, and mould.
• Do not obstruct the air vents. Keep a minimum distance from the appliance to ensure
adequate ventilation.
Inspect the appliance before use – if the appliance shows any signs of defect, do not use it.
ASSEMBLY:
• Place the filter in the dust container – ensure the filter is clean before use. Carefully follow
the markings found on the parts of the appliance.
• Place the filter in the dust container. Ensure the dust container is securely attached. The
filters must be clean before use.
USE OF THE ACCESSORIES:
The accessories provided with the appliance allow for it to be used for different applications.
• Adapter: required to attach the different accessories provided. Always attach the
adapter to the suction head before inserting the chosen accessory.
• Suction nozzle: for hard-to-reach areas.
• Brush: used to remove dust from textile surfaces.
• Large suction nozzle: used for flat surfaces.
• Flexible hose extension: used for hard-to-reach areas.
USE:
• Attach the appropriate accessory onto the appliance using the adapter.
• Turn on the vacuum cleaner by pushing the ON/OFF switch forward.
• After use, turn off the vacuum cleaner by pushing the ON/OFF switch backward.
• Unplug the appliance before cleaning and storing it.
Caution: always turn off the appliance before removing or changing the accessory.
For use inside a car: Connect the cigarette lighter plug and use directly following the
instructions above.
CHARGING THE APPLIANCE:
• Use the 230-240V AC charger/adapter provided (do not use other chargers) or the 12V
DC charger provided.
• Charge the battery completely before first use. Two hours minimum with the AC charger,
1 hour minimum with the 12V cord.
• When installing, make sure the power cord is not stuck or damaged.
• The charge indicator will turn red to confirm that the appliance is charging. When the
EN
19
Publicidad
