Operation; Start Cleaning; Automatic Function - Linsar E0B/RVC-VS-ECOM Manual Original

Operation

Start cleaning

1. Place the Robot Vacuum Cleaner 1 on the floor.
2. Press and hold the on/off switch 9 for about 5 seconds to switch on the Robot
Vacuum Cleaner 1.
If the product is in the charging station 2, this step is not necessary.
3. Activate the automatic function (see chapter "Automatic function").
4. Adjust the suction power if necessary by pressing Suction power high 27 or
Suction power low 28 on the remote control 4.

Automatic function

1. Press the on/off switch 9 or the AUTO
button 24 on the remote control 4.
The Robot Vacuum Cleaner systematically
cleans the entire area and then
automatically returns to the charging
station.
118