Beko VRT 94929 VI Manual Del Usuario página 13

2 Part assembling
2.1 Elbow (17)
The elbow is extension tools, one end is inserted
into the suction port , the other end is connected
with the accessories, which can clean corners or
narrow spaces (7).
2.2 Crevice (18) and soft brush
(20)
Push the round part of the accessory into the
suction part until it clicks. Soft brush cleans your
furniture without harming it (6-7).
3 Use
3.1 Charging Indicator
Working Charging
Persistent Blinking
white light white light
3.2 Charging station (12)
While charging the battery on the charging dock
the charge indicator flashes white.
Cordless Stick Vacuum Cleaner / User Manual
It indicates the
battery charge
status.
Fully Lower
charged power
Persistent Blinking red
white light light
2.3 Mini turbo brush (19)
Push the end of the Mini-brush into the suction
part until it clicks.
Remove it by pulling the buttons (6).
2.4 Hard floor roller (15)
Hard floor roller provides higher cleaning
performance on parquet, tiles etc. (17)
• When you receive this product,
please use the charger provided
by our company to recharge the
battery for 3 hours (no need to
charge it full) and the charging
frequency should be every 3
months.
C
• Do not place the battery on the
charging base for a very long time.
• When the battery is not in use for a
long time or it is over-discharged,
you may find the working time is
reduced at the first few times.
We recommend you fully charge
the battery (usually 6 hours) and
discharge it. Repeat this action
two times.
The product has the ability to stand in
•
upright position with the locking
mechanism of the brush. The floor must
be level for this function to be used
correctly (hard floor, parquet, etc.). If
the product is not used and when it is to
be stored, it must be kept on its
charging station. The vacuum cleaner
can stand in upright position (on
surfaces such as hard floors, parquet,
etc.) for short durations (2-3 minutes) thanks to
the brush locking mechanism.
13 / EN