Blackstone 2264 Manual Del Propietário página 10

OWNER'S MANUAL | USING YOUR BLACKSTONE
IGNITIoN INSTRUCTIoNS
1. CHECK VALVES
Turn knob to oFF position�
STEP 01
Push in knob and release� Knob should spring back�
STEP 02
If knobs do NoT If knobs do NoT spring back, replace valve assembly before using appliance. spring back, replace valve assembly before using appliance.
Rotate knob to loW then turn back to oFF� Knob should
STEP 03
turn smoothly�
If burner does not ignite with open LPG cylinder valve, gas
will continue to flow out of burner and could accidentally/
inadvertently ignite with risk of injury.
Ensure gas is o at the supply shut o valve before checking
appliance valves.
3. CHECK BURNER FLAME
Always check burner flame before use�
light burners and rotate knobs from HIGH to loW�
STEP 01
look below the cooking top to view burners� When knob is at
STEP 02
HIGH, flames should be larger than when knob is at loW�
10
3. CHECK BURNER FLAME
WARNING
2. BATTERY POWERED IGNITION
do NoT lean over the appliance while lighting�
Insert one (1) AA
STEP 01
battery (not included) under the
ignitor button�
Screw the button into place over
the positive terminal�
STEP 02
❶ ❶ Turn the control knob to oFF�
Turn gas oN at the lPG cylinder
by turning the oPd hand wheel
counterclockwise 1 to 3 turns�
STEP 03
❷ ❷ Push and hold the ignitor button�
❸ ❸ Push and turn the control knob counter-clockwise to HIGH�
(Release the ignitor button when the burner lights�)
❹ ❹ Adjust the temperature to desired level�
❶ ❶
❸ ❸
❹ ❹
HEALTHY BURNER FLAME
PATTERN
❶ ❶
❷ ❷
❸ ❸
❶ ❶ Flickers of yellow color�
❷ ❷ dark blue color�
❸ ❸ Vibrant blue�
HEALTHY BURNER FLAME
Model: 2264
1 to 3 turns 1 to 3 turns
❷ ❷
BURNER FLAMES ARE YELLOW
OR IRREGULAR
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter�
BLACKSTONEPRODUCTS.COM/SUPPORT
BURNER FLAMES ARE YELLOW