Descargar Imprimir esta página

INVENTOR IW24BL Manual De Usuario página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 89
Defrosting Process
Water drops, or possible frost may be accumulated in the rear of the unit when the
compressor is operating, this is normal operation. There is no need for wiping off these
water drops or frost, as the defrosted water will be collected into the drain tank and then
lead in the water disposal pan, located above the compressor, and will be vaporized.
10. STORAGE
When appliance is inactive for an extended period of time, please make sure you follow the
instructions below, for the appropriate storage of your appliance:
• Turn the unit off allowing one day before storage.
• Remove all the items from the interior compartment.
• Clean the removable parts of the device.
• Leave the door open to prevent unpleasant odors.
• Cover the device.
• Store the wine cooler in upright position, in a dry, well ventilated area and avoid direct
sunlight.
11. TIPS
Do not place products too close. Ensure a sufficient distance for optimum air circulation
in the wine cooler.
Avoid extensive use of the door on wet and hot weather. Be cautious, once the Wine
Cooler's door is open to shut the soonest possible.
Do not place goods in direct contact with the wall of the refrigerator, always allow some
space.
Be certain the wall behind the appliance is dirt and dust free, especially with outer
condenser equipped units.
Do not store boxed wine in this device.
Avoid placing hot beverages in the wine cooler.
Moisten the cork before replacing it into the bottle to prevent air space between the cork
and the bottle.
EN
• Never use sharp or metal objects to remove frost
while defrosting
• Do not use any mechanical devices or instruments to
accelerate the defrosting process prior to consulting
the manufacturer
15

Publicidad

loading

Este manual también es adecuado para:

Iw24bl-bs