Descargar Imprimir esta página

LG VM122H9 NJM2 Manual Del Propietário página 41

Ocultar thumbs Ver también para VM122H9 NJM2:

Publicidad

Idiomas disponibles

Idiomas disponibles

Symptoms
The appliance does not
emit cool air.
Performance
Symptoms
The indoor unit is still
operating even when
the appliance has been
turned off.
The air outlet on the
indoor unit is
discharging mist.
Water leaks from the
outdoor unit.
There is noise or
vibration.
The indoor unit gives
off an odour.
The desired temperature is higher than the current temperature.
• Set the desired temperature to a level lower than the current temperature.
There is a heating source nearby.
• Avoid using heat generators like electric ovens or gas hobs while the air
conditioner is in operation.
Fan mode is selected.
• During Fan mode, air blows from the appliance without cooling or heating
the indoor air.
• Switch the operating mode to cooling operation.
Outside temperature is too high.
• The cooling effect may not be sufficient.
The Auto Clean function is being operated.
• Allow the Auto Clean function to continue since it reduces any remaining
moisture inside the indoor unit. If you do not want this function, you can
turn the indoor unit off.
The cooled air from the appliance makes mist.
• When the room temperature decreases, this phenomenon will disappear.
In the heating operations, condensed water drops from the heat
exchanger.
• This requires that a drain hose should be installed under the base pan.
Contact the installer.
A clicking sound can be heard when the appliance starts or stops due to
movement of the reversing valve.
Creaking sound: The plastic parts of the indoor unit creak when they
shrink or expand due to sudden temperature changes.
Flowing or blowing sound: This is the flow of refrigerant through the
appliance.
• Noise is normal during or after operation. It is not a sign of malfunction.
Odour (such as cigarette smoke) may be absorbed into the indoor unit
and discharged with airflow.
• If the smell does not disappear, you need to wash the filter. If this does not
work, contact the service centre to clean your heat exchanger.
TROUBLESHOOTING
Possible Cause & Solution
Possible Cause & Solution
41

Publicidad

loading