Publicidad
Idiomas disponibles
Idiomas disponibles
The power tool has double insulation, which means
that all external metal parts are insulated from the
electrical components. Therefore, in accordance with EN,
no ground connection is required. However, double
insulation does not replace normal safety precautions,
which must be observed when using the tool.
Do not expose the power tool to rain or use it in wet or moist
environments. Water entering a power tool increases the
risk of damage to the power tool and electric shock to the
user.
Only hold the power tool by its insulated surfaces, which
prevent electric shock if the power tool comes into contact
with hidden wires during use.
Do not use power tools in explosive environments,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks that can ignite liquids,
gases, or dust.
Ensure the grass trimmer is only used by users who have
familiarized themselves with the instruction manual.
To ensure that you operate the grass trimmer safely, before
beginning to operate it, make sure that:
▪ Inspect the tool before each use. Check that the
attached accessories are assembled correctly and in
good condition. In case there is excessive damage or
wear, replace the accessories;
▪ In normal operation, the power tool produces vibrations.
Check that all fixing screws are properly screwed.
Regular inspection is important to ensure the safety and
performance of the power tool;
▪ After the accessories' assembly and before using the
tool, test at full speed without load for a while. Check for
moving parts misalignment or any other condition that
may affect the tool operation. Check that all moving
parts rotate smoothly and without abnormal noises;
▪ Check that the safety devices are in perfect condition
and work properly. Never use the power tool if the safety
devices are missing, inhibited, damaged or worn out;
▪ If the "ON/OFF" switch is damaged or does not allow the
operation of the tool to be controlled, it must be repaired
or replaced in order to prevent unintentional starting of
the tool.
Make all adjustments and work necessary for the correct
assembly of the power tool, if you have any questions or
difficulties, contact your official dealer.
Keep third parties away from the power tool's area of
operation. Never work while animals or people,
especially children, are in the danger zone.
Keep the work area clean, organized and well lit (250 to 300
lux light), thus decreasing the risk of accidents.
Always wear personal protective equipment and clothing.
Wearing a visor or goggles, dust mask, hearing protection,
anti-slip safety shoes, long-sleeved clothing, gloves and
helmet properly reduces the risk of injury.
Clothing worn during use of the machine must be
adequate, tight and closed, for example, a work boiler suit.
Do not wear loose clothing or jewelry. Keep hair, clothing
and gloves away from moving parts.
The use of the tool causes high load of vibrations
which can cause damage to the circulatory and
nervous systems, especially in people with circulatory
problems. Seek medical attention if symptoms occur that
may be caused by vibrations. These symptoms, which occur
mainly in the fingers, hands or wrists, include, for example,
loss of sensation, pain, muscle weakness, discoloration of
the skin or unpleasant tingling.
When operating the machine, plan breaks and avoid
operating the machine for long periods of time. Permanent
vibrations are harmful to health.
The control and safety devices installed in the power tool
must not be removed or inhibited.
Publicidad
