Descargar Imprimir esta página

DeWalt DXVCS001 Manual De Instrucciones página 5

Separa y captura el

Publicidad

Idiomas disponibles

Idiomas disponibles

Screw holes
Drum lid
Screw holes
NOTICE:
No dust tank are included in product.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
WARNING:
hazard, empty dust tank after each use.
BEFORE USING THIS ACCESSORY, READ
AND UNDERSTAND THE INSTRUCTION
MANUAL THAT CAME WITH THE VACUUM
The dust separator contains a lter feature. It has
the capability to
inlet
can be used to
inlet
or off patios and driveways. Follow the steps below
to use the dust separator with dust tank.
1. Insert the vacuum's hose end into outlet of dust
separator, the hose should be snapped into place.
2. Locate
inlet
port on the dust separator.
3. Insert one end of the 1-7/8" x 7 ft. hose into the
inlet
port.
4. Plug the power cord of the vacuum into an
appropriate outlet.
5. Press the switch on the vacuum to the "ON "
position.
Air Outlet
WET/DRY
VACUUM
Screw holes
To reduce the chance of re
sawdust and other debris. It
dust and debris out of garages
Air
Inlet
SEPARATES & CAPTURES
UP TO
99.5%
of debris in the airstream
CLEANING
To keep the poly tank looking its best,
clean the outside with a cloth dampened
with warm water and mild soap.
To clean the tank:
1. Dump out debris.
2. Wash tank thoroughly with warm water
and mild soap.
3. Wipe out with dry cloth.
TROUBLESHOOTING
NOTICE:
Minor problems often can be
xed without calling customer service.
PROBLEM
Dust separates not
separating well.
Low air volume.
Material swirls in
cyclone and won't
drop down into
drum.
Hose connections
not tight.
3
ENGLISH
SOLUTION
Air leak. Check cyclone
ange / drum lid / barrel.
Even small leaks will affect
performance.
Vacuum lter clogged.
Blockage in hose.
Air leak in bottom of cyclone
/ drum lid or dust drum.
Temporarily cut off air ow to
allow the materials to drop
into the tank and then
restart.
Use only D
WALT
E
recommended ttings.

Publicidad

loading