Polygroup SUMMER WAVES AP-04 Manual Del Propietário página 3

CARE, STORAGE & MAINTENANCE
1. Save the original packing box for storage purposes.
2. Let the air pump cool down for at least 30 minutes before storage.
3. Store the air pump in a cool/dry place. Keep out of reach of direct sunlight and chemical substances.
4. The motor of this air pump is protected by a thermal overload protection device. This device detects any over-heat condition and switches off the motor automatically;
the motor will be switched on automatically upon cooling down.
5. This air pump does not contain any user serviceable parts; any other servicing is to be performed by an authorized service representative.
6. Use only a damp cloth soaked in mild soap/detergent and water to clean the outer surfaces of the air pump. Do not use any kind of chemical or solvent. Always
unplug the air pump and stow the cord during cleaning.
7. Do not twist the supply cord while in use.
SERVICING OF DOUBLE INSULATED PRODUCT
In a double-insulated product, two systems of insulation are provided instead of grounding. No means for grounding is provided on a double-insulated
product, nor is a means for grounding to be added to the product. Servicing a double-insulated product requires extreme care and
knowledge of the system, and is to be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical
to the parts they replace.
1. This product must not be disposed of with domestic wastes.
2. This product has to be disposed of at an authorized place for recycling of electrical & electronic appliances.
3. By collecting and recycling waste, you help save natural resources, and make sure the product is disposed of in an environmental and healthy way.
DISPOSAL & ENVIRNOMENT
OWNER'S MANUAL
MADE IN CHINA
3