cecotec BAMBA RITUALCARE LIBERTY Manual De Instrucciones página 68

ENGLISH
3. OPERATION
Charging the device
Make sure the appliance is switched off.
-
Slide the cover of the charging port to access it.
-
Connect the charging cord to the product and then to a
-
compatible power adapter.
Charge the appliance to full power before using the
-
appliance for the first time or after a long period of
inactivity.
- The battery indicator light will illuminate red indicating
that the device is charging; once fully charged, the indicator
light will illuminate green.
Device operation
1. Fully charge the battery before using the hair straightener.
2. Remove the plate lock by sliding the button to the unlocked
68 BAMBA RITUALCARE LIBERTY
position.
3. Hold down the power button for 2 seconds to switch the
appliance on. Once switched on, the appliance will start to
heat up and the power indicator light will flash blue. The
default temperature is 180 ºC, so the blue indicator light
will stop flashing when the set temperature is reached
(approximately 3 minutes).
4. Separate strands of hair about 2 cm wide and glide the
straightener from the roots to the ends to straighten the
hair.
5. Repeat the process on the same strand until getting the
desired straightness is achieved; then, move on to the next
strand.
6. When the battery is low, the battery indicator light will
flash red until it turns off automatically.
7. Hold down the power button for 2 seconds to switch the
appliance off.