Publicidad
Idiomas disponibles
Idiomas disponibles
TO STORE ATTACHMENTS
Remove dusting brush or combination
brush. Snap into appropriate
storage location.
Remove crevice toot from the wand by twist-
ing. Lay aside.
Remove the extension
wand from the hose.
Twist the wand to the left and pull from the
hose end.
Upper
Wand
Unlock the wand by turning the wand lock-
ing ring to the UNLOCK
position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com-
pressed wand. Snap into the appropriate
storage location.
\,
Reinsert the hose fully into the opening on
the lower body from which it was removed.
Press firmly to assure connection.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose.
Property
damage could result.
EXTENSION HOSE
SOME
MODELS
Some models include an extra hose which
connects to the stretch hose on the vacuum
for a longer cleaning
reach.
_onus
Release
Electrical
Connec_on
-Extension
Hose
Connect bonus hose to extension
hose by
pressing together. Make sure electrical
connections
are pressed firmly together.
To disconnect press release button on
hose and pull apart.
When using the regular hose or with
the extension hose attached, the
cleaner should be on a solid surface
on the same level or below the level of
the user'sfeet. DO NOT use the hoses
when the cleaner is above the level of
the user'sfeet.
POWER-MATE
JR.®
When
attaching
Power-Mate
Jr.® to
extension
hose press together
and align
electrical
connections.
Power-Mate Jr.®
_-
_
Electrical
Connectors
To disconnect
press release
button on
hose and pull apart.
CAUTION
!
rf., CAUTION
DO NOT leave the Power-Mate
Jr.®
running in one spot for any length of
time. Damage to carpet may occur.
10
Publicidad
