Descargar Imprimir esta página

Avanti SED70D0W Manual De Instrucciones página 30

Publicidad

Idiomas disponibles

Idiomas disponibles

CHANGE THE DRYER VENT LOCATION
our new dryer is shipped to vent to the rear. It can also be configured to
vent to he bottom or left side (as seen from the front).
An Adapter kits which are standard components can be purchased from
any retailer. This kit contains the necessary duct components to change
the dryer vent location.
Tools and materials you will need
Phillips screwdriver
aluminum
1.
Remove the two rear exhaust retaining screws, then pull out the exhaust duct.
Option 1: Side venting
2. Press
the tabs on the knockout and carefully remove the knockout for
the desired vent opening.
Attach the adapter duct onto the blower housing of the dryer as shown.
Rigid or UL-listed
flexible metal
tape
4'' (10.2 cm) duct
Rear
Exhaust Duct
Adapter
Duct
Knockout
Elbow 4'' (10.2 cm)
Retaining
Screw
Gloves
30

Publicidad

loading

Este manual también es adecuado para:

Sgd70d0wg