Publicidad
Idiomas disponibles
Idiomas disponibles
3 Getting Started
3.1
General Notes on Handling
The Spectroquant
Prove plus spectrophoto-
®
meter is an optical precision instrument. It
should always be handled with care, especially
when in mobile use. Always protect the instru-
ment from conditions that could damage the
mechanical, optical and electrical components.
Please note the following in particular:
•
The temperature and humidity during opera-
tion and storage must be within the limits
specified in the "Technical Data" section
the Operating Manual)
The instrument must never be exposed to
the following:
•
Extreme dust, humidity and moisture
•
Intense light and heat
•
Fumes that are corrosive or contain high con-
centrations of solvents
In addition take care of the following:
•
For measuring, the instrument must be placed
on a flat surface
•
Spilled liquid or other material should be re-
moved immediately
Manual)
•
If a cell has broken in the cell holder, the cell
holder should be cleaned immediately
Operating Manual)
•
The cover should always be closed when the
spectrophoto meter is not in use
•
When the spectrophotometer is being trans-
ported, the cell compartment must be empty
Version 1.0 – 07/2023
(see
(see the Operating
(see the
3.2
Initial Setup
Proceed as follows:
•
Connect the power adapter
•
Switch on the spectrophotometer
3.2.2)
•
Set the language
(see section 3.2.3)
•
Set the date and time
•
Run the self-test
(see section 3.2.5)
NOTE
For our Operating Manual and more information
about the technical videos please visit:
www.sigmaaldrich.com/spectroquant
3.2.1 Connecting the Power Supply
Power is supplied through the power adapter
provided. The power adapter supplies the spec-
trophotometer with the required voltage and
type of current (24 V DC).
CAUTION
The line voltage at the user location must fulfil
the specifications stated on the power adapter
(the specifications are also indicated in the Op-
erating Manual). Only ever use the 24 V power
adapter provided. Please note that damage
caused by using a different power adapter than
the one supplied voids all warranty claims.
(see section 3.2.1)
(see section
(see section 3.2.4)
1
2
3
4
5
11
Publicidad
