MERCK Spectroquant Prove Supelco Spectrophotometer 100 plus Guía Rápida página 12

3 Getting Started –
1
2
3 3
Connecting the power adapter:
1. Connect the miniplug
to the socket
2. Connect the power adapter to a wall socket.
4
5
12
3.2 Initial Setup
2
1
of the power adapter
1
of the spectrophotometer.
2
3.2.2 First Power-on
After switching on the spectrophotometer for the
first time you are automatically guided through
the language, date and time setup procedures.
1
1. Press the ON/OFF button
photometer gives an audible signal (beep)
and starts booting for approximately 2 min-
utes. You will see the following display:
2. The display switches to language setup
section 3.2.3).
. The spectro-
1
(see
Version 1.0 – 07/2023