Publicidad
Idiomas disponibles
Idiomas disponibles
5
16.
Dust Container
17.
Tube button
6
Utilização do dispositivo
Assembly (Figures 2 )
To connect the motor and dust container to the tube, insert the end of the tube into the slot provided on
the motor and dust container assembly until you hear a 'click'.
To connect the nozzle to the tube, insert the end of the tube into the slot on the nozzle until it clicks into
place.
To disconnect the components, press buttons 6 or 7 (Figure 1) and disconnect the components.
Before use
Before using the device for the first time, charge it for 3 to 4 hours.
Choose your accessory according to your needs:
Motorised brush: ideal for hard floors and easily accessible spaces
Nozzle: ideal for small, hard-to-reach areas
Brush attachment: ideal for fabrics (sofas, carpets, etc.)Choose your accessory according to your needs
Press the on-off button (button 1 figure 1) to switch on the appliance and start vacuuming.
Press the "button (button 2 figure 1) to change the suction power (normal or turbo).
(normal or turbo).
Note: after Note: After use, recharge your appliance.
Limpeza e manutenção
Unplug the appliance before cleaning and wait for it to cool down.
Clean the body of the appliance with a damp cloth and leave to dry.
Do not use solvents, abrasive products or aerosols to clean the appliance.
Never immerse the appliance in water or any other liquid.
Cleaning the dust tray
Remove the tube from the motor and dust container assembly (button 3 figure 2).
If you wish, you can also separate the dust container alone from the handle motor assembly by pressing
button A (see figure 3). Empty the dust container( Figure 4).
Clean the filter:
Then separate the motor from the dust container by rotating the top part anti-clockwise and pulling it
out. Remove the filters from the centre of the dust container. Remove the paper filter in the centre of the
filter assembly by turning it anticlockwise(Figure 5). Clean the paper filter by lightly tapping it or
vacuuming it with another appliance. Clean the metal filter and dust tank with a lint-free cloth. You can
also rinse the metal filter and dust tank if necessary. Dry both parts thoroughly before use.
Clean these parts regularly, at least every 5 uses, to ensure that the appliance works properly.
Cleaning the floor brush and roller :
See figure 6
A eliminação correta da unidade - (Equipamento Elétrico e Eletrônico)
(Aplicável na União Europeia e outros países europeus que adotaram sistemas de recolha de lixos
separados). A Diretiva Europeia 2012/19 / EU relativa aos resíduos de equipamentos elétricos e
eletrónicos (REEE), exige que os dispositivos domésticos utilizados não são jogados no fluxo normal
de lixo doméstico. Os aparelhos antigos devem ser recolhidos separadamente, a fim de otimizar a
recuperação e reciclagem de materiais conter e reduzir o impacto na saúde humana e no
ambiente.
11
Charger
www.livoo.fr
Publicidad
