Publicidad
Idiomas disponibles
Idiomas disponibles
•
For the features of the appliance, refer to the external packaging.
•
DO NOT use near a hob. The supply cord shall not come into
contact with hot , incandescent surfaces, open flames, pots and
other utensils.
•
DO NOT use extension cords or adaptors .
Warning
Note
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer to Figure [A] in the Illustrative Guide to check the contents of the package.
1. Lid
2. Lid opening button
3. Handle
4. Water level indicator
5. On/off lever
6. Kettle body
7. Electrical support
Unpack the appliance and remove any inserts or adhesive labels from the product.
•
Remove the filter (12) by pulling it upwards, and pull out the two hooks from the seats [Fig. D and E] and
wash it with water
•
Fill the kettle with water and bring to a boil before use. Discard the water and rinse the kettle with cold
water. Repeat three times to remove any processing residue.
•
After rinsing the kettle, set the removable filter (12) back into place.
•
Unroll the power cable (9) from the electrical support (7)
•
Place the electrical support (7) and the kettle body (6) on a flat surface.
•
Remove the kettle from the electrical support
•
Open the lid (1) using the relevant button (2) and fill the kettle up to the desired level without
exceeding the indicated maximum level.
SYMBOLS
CLEANING BEFORE FIRST USE
ASSEMBLY
Prohibited
8. Technical data
9. Power cable
10. Thermometer
11. Nozzle
12. Removable filter
EN
11
Publicidad
